12" Front Dirt Bike Rim

12" Dirt Bike Front Rim: Compatible with Moto Cross MX70

This 12-inch front rim has been specifically developed to fit the Moto Cross MX70 perfectly, ensuring a precise and secure installation. By choosing a compatible part, you preserve the original balance of your dirt bike and benefit from optimal maneuverability on off-road terrain. Our XtremRS technicians check every batch to ensure that the geometry meets the frame specifications, resulting in better line holding and reduced vibrations. To extend the life of your rim, we recommend regular checks of the nut tightness and cleaning after every outing to remove mud and debris that could corrode the finish.

12" Dirt Bike Front Rim: 10mm Disc Spacing

The 10mm disc spacing ensures perfect alignment between the brake disc and the rim, which is essential for responsive and safe braking. Correct spacing prevents parasitic friction that could lead to premature disc wear or a loss of braking system efficiency. At XtremRS, we advise periodically checking the condition of the disc and verifying that the spacing remains within the manufacturer's tolerances, especially after significant impacts or jumps. Preventive maintenance ensures not only your safety but also consistent braking performance on all types of ground.

12" Dirt Bike Front Rim: 6301rs Bearing for Smooth Rotation

The 6301rs bearing integrated into the hub offers low rolling resistance and an excellent capacity to support the radial and axial loads encountered in off-road riding. This sealed design protects against the intrusion of dust, water, and particles, thereby reducing the need for frequent greasing and extending the life of the hub. To maintain smooth rotation, we recommend visually inspecting the bearing after each intensive use and replacing it at the first signs of play or abnormal noise. Proper bearing maintenance directly contributes to steering stability and rider confidence during sudden acceleration and braking.

12" Dirt Bike Front Rim: XTRM 81 Brand, a Guarantee of Quality

Manufactured under the reference XTRM 81, this rim benefits from the expertise of a recognized specialist in off-road components. The grey finish of the hub offers good corrosion resistance while maintaining a sober and professional look. By choosing an XTRM stamped part, you are assured of rigorous quality control, materials selected for their robustness, and dedicated after-sales support. Our XtremRS customer service is at your disposal to answer your technical questions, guide you through installation, and inform you about applicable warranties. Thus, you can ride with complete peace of mind, knowing that your equipment meets your performance and safety requirements.